Product number: HFN5

This apparatus is designed to determine the friction torque in a plain journal bearing under varying conditions of load, speed and lubrication.

The ground steel shaft is driven by a variable speed electric motor. The journal housing has a thermometer pocket, a sight feed lubricator and a removable end cover. Oil cannot be thrown out. Friction due to end face contact is very much reduced by the use of a "floating" sleeve.

Friction torque is measured by adding weights to a Load hanger suspended from the damped torque arm. Weights added to the lower hanger apply a steady load to the bearing of up to 650N. Phosphor Bronze, sintered bronze and impregnated PTFE sleeves are supplied as standard journal housings.

An electronic tachometer is provided for measurement of the shaft speed, which can be controlled using the control potentiometer on the front control box.

An oil drip tray is provided to ensure all oil passing through the journal bearing is captured.

A full set of weights, hangers and tools is provided along with a comprehensive Instruction manual for student and lecturer.

Specifications and resources

Shaft speed: 1500rpm
Motor speed control potentiometer
Drip feed lubricator for journal bearing lubrication
Torque arm lever 4 : 1 ratio
Journal shaft: Steel, Ø40mm nominal
Journal bearings; Outside diameter = Ø50mm, inside diameter = Ø40mm