Product number: B500B
The optional duct configuration B500B allows the addition of a third parallel branch and two air supply units.
Specifications and resources
Ø150mm diameter ducting
Ø160mm to Ø150mm reducer
- About
- Products
- Accessories
- Acoustics
- Air Conditioning
- AIR CONDITIONING LABORATORY UNIT (220V), COMPUTER LINKED
- AIR CONDITIONING LABORATORY UNIT (220V), COMPUTER LINKED, with PID CONTROLLER
- AIR CONDITIONING LABORATORY UNIT (220V), with PID CONTROLLER
- AIR CONDITIONING LABORATORY UNIT (415V) with PID CONTROLLER
- AIR CONDITIONING LABORATORY UNIT (415V), COMPUTER LINKED
- AIR CONDITIONING LABORATORY UNIT (415V), COMPUTER LINKED, with PID CONTROLLER
- AIR CONDITIONING LABORATORY UNIT
- OPTIONAL DATA ACQUISITION UPGRADE
- OPTIONAL DIGITAL TEMPERATURE UPGRADE
- OPTIONAL DUCTING UPGRADE 'B'
- OPTIONAL DUCTING UPGRADE 'C'
- OPTIONAL ENVIRONMENTAL CHAMBER
- OPTIONAL RECIRCULATION DUCT UPGRADE
- PRESSURE ENTHALPY (PH) SOFTWARE UPGRADE
- VENTILATION TRAINER
- Air Flow and Aerodynamics
- AIRFLOW SYSTEM
- BERNOULLI'S EQUATION
- BOUNDARY LAYER INVESTIGATION
- DRAG FORCE INVESTIGATION
- FLOW AROUND a BEND INVESTIGATION
- FLOW VISUALISATION INVESTIGATION
- JET ATTACHMENT INVESTIGATION
- MULTITUBE MANOMETER
- PRINCIPLES OF AIRFLOW, PRESSURE, AND VELOCITY DISTRIBUTION
- PRINCIPLES of AIRFLOW, FAN TEST and FLOW MEASUREMENT
- PRINCIPLES of AIRFLOW, FRICTION LOSSES in BENDS and PIPE ELEMENTS
- ROUND TURBULENT JET INVESTIGATION
- Combustion
- 4 STROKE DIESEL ENGINE, SINGLE CYLINDER
- 4 STROKE GASOLINE ENGINE, SINGLE CYLINDER
- BOMB CALORIMETER
- BOMB CALORIMETER
- COMBUSTION LABORATORY UNIT - GAS BURNER FITTED
- COMBUSTION LABORATORY UNIT - GAS BURNER FITTED
- COMBUSTION LABORATORY UNIT - GAS and OIL BURNER SUPPLIED
- COMBUSTION LABORATORY UNIT - GAS and OIL BURNER SUPPLIED
- COMBUSTION LABORATORY UNIT - OIL BURNER FITTED
- COMBUSTION LABORATORY UNIT - OIL BURNER FITTED
- FLAME PROPAGATION and STABILITY UNIT
- FLUE GAS ANALYSER
- GAS BURNER
- INTERNAL COMBUSTION ENGINE TEST STAND - GASOLINE
- INTERNAL COMBUSTION ENGINE TEST STAND - DIESEL
- INTERNAL COMBUSTION ENGINE TEST STAND - DIESEL
- INTERNAL COMBUSTION ENGINE TEST STAND - GASOLINE and DIESEL
- INTERNAL COMBUSTION ENGINE TEST STAND - GASOLINE and DIESEL
- INTERNAL COMBUSTION ENGINE TEST STAND - GASOLINE
- OIL BURNER
- Compressible Fluid Flow
- COMPRESSIBLE FLOW RANGE
- COMPRESSIBLE FLOW, PIPE FRICTION MODULE
- DEADWEIGHT TESTER
- EXPERIMENTAL IMPULSE TURBINE
- EXPERIMENTAL REACTION TURBINE
- FLUIDISATION AND FLUID BED HEAT TRANSFER MODULE
- NOZZLE PERFORMANCE TEST MODULE
- NOZZLE PRESSURE DISTRIBUTION MODULE
- PRESSURE MEASUREMENT BENCH
- PRESSURE TRANSDUCER and DIGITAL DISPLAY
- SINGLE STAGE COMPRESSOR TEST UNIT
- SOLAR / HEAT SOURCE VAPOUR TURBINE
- SOLAR PANELS AND INSTALLATION PACKAGE
- TWO STAGE COMPRESSOR TEST SET
- VORTEX TUBE REFRIGERATOR MODULE
- Forces (HFC)
- BASIC ROOF TRUSS
- BELL CRANK LEVER
- CENTRE of GRAVITY APPARATUS
- CENTRIFUGAL FORCE APPARATUS
- COMBINED SHEAR FORCE & BENDING MOMENT
- CONSERVATION of ANGULAR MOMENTUM
- CONSERVATION of LINEAR MOMENTUM
- CORIOLIS FORCE APPARATUS
- DERRICK CRANE
- FUNICULUR POLYGON and FORCES APPARATUS
- REACTION of BEAMS APPARATUS
- ROLLING DISC on an INCLINED PLANE
- TENSION COEFFICIENTS APPARATUS
- THREE WIRE SUSPENSION
- TOGGLE JOINT APPARATUS
- TRIANGLE of FORCES
- WALL JIB CRANE
- WORK DONE by a VARIABLE FORCE (VERTICAL AND TANGENTIAL)
- Friction (HFN)
- Heat Transfer
- BENCH TOP COOLING TOWER
- BOILING HEAT TRANSFER MODULE
- BOILING HEAT TRANSFER UNIT
- BOYLES LAW DEMONSTRATOR (COMPRESSOR VERSION)
- COILED CONCENTRIC TUBE HEAT EXCHANGER
- COLUMN A - 7 PLATES
- COLUMN C - 18 PLATES
- COLUMN D - EMPTY COLUMN
- COMBINED CONVECTION and RADIATION MODULE
- CONCENTRIC TUBE HEAT EXCHANGER
- CONCENTRIC TUBE HEAT EXCHANGER
- CROSS FLOW HEAT EXCHANGER
- DEW POINT HYGROMETER
- EXTENDED CONCENTRIC TUBE HEAT EXCHANGER
- EXTENDED PLATE HEAT EXCHANGER
- EXTENDED SURFACE HEAT TRANSFER MODULE
- FILM and DROPWISE CONDENSATION UNIT
- FILM and DROPWISE CONDENSATION
- FINNED TUBE BUNDLE in CROSS FLOW
- FLOW BOILING DEMONSTRATION UNIT
- FLUIDISATION and FLUID BED HEAT TRANSFER UNIT
- FREE and FORCED CONVECTION FROM FLAT, PINNED and FINNED PLATES
- FREE and FORCED CONVECTION FROM FLAT, PINNED and FINNED PLATES
- HEAT EXCHANGER SERVICE UNIT
- HEAT PIPE INVESTIGATION MODULE
- HEAT TRANSFER SERVICE UNIT
- HUMIDITY MEASUREMENT BENCH
- JACKETED VESSEL with COIL AND STIRRER
- LAMINAR/VISCOUS FLOW HEAT TRANSFER UNIT
- LAWS of RADIANT HEAT TRANSFER/HEAT EXCHANGER MODULE
- LINEAR HEAT CONDUCTION MODULE
- LOCAL HEAT TRANSFER ELEMENT
- MARCET BOILER
- PERFECT GAS LAWS DEMONSTRATION MODULE
- PITOT STATIC TRAVERSE PLATE
- PLAIN TUBE and TUBE BUNDLE in CROSS FLOW
- PLATE HEAT EXCHANGER
- RADIAL HEAT CONDUCTION MODULE
- RADIATION ERRORS in TEMPERATURE MEASUREMENT MODULE
- RECYCLE LOOPS
- SHELL and TUBE HEAT EXCHANGER
- STEAM to WATER HEAT EXCHANGER
- TEMPERATURE MEASUREMENT METHODS and CALIBRATION UNIT
- THERMAL CONDUCTIVITY of BUILDING MATERIAL UNIT
- THERMAL CONDUCTIVITY of LIQUID and GASES MODULE
- THERMOELECTRIC HEAT PUMP
- UNSTEADY STATE HEAT TRANSFER MODULE
- WATER WATER TURBULENT FLOW HEAT EXCHANGER
- WATER to AIR HEAT EXCHANGER MODULE
- Water to Air Heat Exchanger
- Hydraulics Bench
- BERNOULLI'S THEOREM DEMONSTRATOR
- CENTER OF PRESSURE MODULENote: the HB100 is not required for operation
- FLOW METER MODULENote: The HB100K is recommended to operate the HB100C and HB100D modules
- FLOWMETER MODULE COMPLETE WITH TRANSDUCER KIT recommended to operate the HB100C and HB100D modules
- FREE & FORCED VORTICES
- HYDRAULICS BENCH
- HYDRAULICS BENCH
- HYDRAULICS BENCH, COMPUTER LINKED
- HYDRAULICS BENCH, COMPUTER LINKED
- IMPACT OF A JET MODULENote: The HB100G requires the HB100K for operation.
- ORIFICE AND VENTURI FLOW MEASUREMENT MODULEEssential extra: HB100K Flow Meter Module
- OSBORNE REYNOLD'S APPARATUS
- PRESSURE LOSSES IN BENDS AND FITTINGSNote : The HB100D requires the HB100K for operation
- PRESSURE and THROTTLE MODULE
- SERIES AND PARALLEL PUMP UPGRADE, 115V / 1PH / 60HzNote: The HB100L requires the HB100M and HB100K for operation.
- SERIES AND PARALLEL PUMP UPGRADE, 230V / 1PH / 50HzNote: The HB100L requires the HB100M and HB100K for operation.
- STABILITY OF FLOATING BODIES c/w Digital DisplayNote: the HB100 is not required for operation
- Mechanisms (HME)
- Propulsion
- Refrigeration
- Renewable Energy
- ADDITIONAL 80W SOLAR PANEL
- ADDITIONAL DEEP CYCLE BATTERY
- ANENOMETER
- CLAMP AMMETER
- COMBINED WIND and SOLAR GENERATOR DEMONSTRATOR
- EDUCATIONAL PEM FUEL CELL
- ENCLOSURE
- FLAT PLATE SOLAR ENERGY COLLECTOR
- HORIZONTAL AXIS WIND TURBINENote : Option C is recommended for operation
- OPTIONAL SINGLE PHASE INVERTER
- OPTIONAL SOLAR SIMULATOR
- OPTIONAL WATER PUMP
- PHOTOVOLTAIC TRAINER
- SINGLE PHASE INVERTER
- SOLAR POWER DEMONSTRATOR
- SOLARIMETER
- TACHOMETER
- WATER PUMP
- WIND POWER DEMONSTRATOR
- Steam
- Strength of Materials (HSM)
- ADVANCED BEAM TESTING APPARATUS (ANALOGUE VERSION)
- ADVANCED BEAM TESTING APPARATUS (DIGITAL VERSION)
- ASYMMETRICAL SHEARING TEST SET
- BENDING TEST SET
- BRINELL HARDNESS TEST SET
- BRINELL MICROSCOPE
- COMBINED BENDING and TORSION APPARATUS
- COMPOUND WIRES APPARATUS
- COMPRESSION of SPRINGS APPARATUS
- CREEP TESTING MACHINE
- CRITICAL CONDITION of STRUTS
- CURVED BAR APPARATUS
- DEEP DRAW TEST SET
- DEFLECTION of BEAMS APPARATUS
- ELECTRICAL RESISTANCE STRAIN GAUGE
- EXTENSION OF SPRINGS APPARATUS
- EXTENSION and COMPRESSION of SPRINGS
- Model Set 'A'
- Model Set 'B'
- Model Set 'C'
- OPTIONAL ALUMINIUM TEST SPECIMEN SET
- OPTIONAL ALUMINIUM TEST SPECIMEN X (10 + 30CM ROD)
- OPTIONAL BRASS TEST SPECIMEN SET
- OPTIONAL BRASS TEST SPECIMEN X (10 + 30CM ROD)
- OPTIONAL COMPRESSION ACCESSORY
- OPTIONAL FLITCHED BEAM
- OPTIONAL MILD STEEL TEST SPECIMEN X (10 + 30CM ROD)
- OPTIONAL NYLON TEST SPECIMENS
- OPTIONAL POLYPROPYLENE TEST SPECIMENS
- OPTIONAL PVC TEST SPECIMENS
- OPTIONAL SPECIMEN SET
- OPTIONAL STEEL TEST SPECIMEN SET
- OPTIONAL TENSION ACCESSORY
- OPTIONAL TEST BEAM SET
- OPTIONAL TORSION SPECIMENS
- PENDULUM IMPACT TESTER (25J)
- POLARISCOPE
- ROCKWELL/BRINELL HARDNESS TESTER
- ROTATING FATIGUE MACHINE (ANALOGUE VERSION)
- ROTATING FATIGUE MACHINE (ELECTRONIC LOADING MECHANISM)
- SPRING TESTING SET
- SYMMETRICAL SHEARING TEST SET
- TORSION TESTING MACHINE (30Nm)
- TORSION and DEFLECTION TESTING APPARATUS
- TORSION of BARS APPARATUS
- UNIVERSAL TESTING MACHINE
- UNSYMMETRICAL CANTILEVER APPARATUS
- Structures (HST)
- BENCH MOUNTED FRAME
- BENDING MOMENT in a BEAM
- BENDING STRESS in a BEAM
- BUCKLING of STRUTS
- COMBINED SHEAR FORCE & BENDING MOMENT
- CONTINUOUS and INDETERMINATE BEAMS
- DEFLECTION of BEAMS and CANTILEVERS
- DEFLECTION of CURVED BARS
- DEFLECTION of FRAMES
- DEFLECTIONS of TRUSSES
- DIGITAL INTERFACE
- EQUILIBRIUM of FORCES
- EQUILIBRIUM of PARALLEL FORCES
- EQUILIBRIUM of RIGID BODY
- FORCES in a TRUSS (Resolution)
- HST3 BEAM SPECIMENS
- HST5 SEMI-CIRCULAR ARCH
- HST7 OPTIONAL REDUNDANT SQUARE FRAME
- HST7 OPTIONAL OPEN SQUARE FRAME
- HST7 OPTIONAL RECTANGULAR PORTAL with OVERHANGING TOP MEMBER
- HST7 OPTIONAL SQUARE PORTAL FRAME
- HST7 OPTIONAL UNSYMMETRICAL PORTAL FRAME
- HST8 OPTIONAL PITCHED PORTAL SPECIMENS
- HST8 OPTIONAL RECTANGULAR PORTAL SPECIMENS
- PIN JOINTED FRAMEWORKS
- PLASTIC BENDING of BEAMS
- PLASTIC BENDING of PORTALS
- REDUNDANT TRUSS
- SHEAR FORCE in a BEAM
- SIMPLE SUSPENSION BRIDGE
- STRAIN MEASUREMENT for STRUCTURES
- STRUCTURES SOFTWARE PACKAGE
- SUSPENDED CENTRE SPAN BRIDGE
- SUSPENSION CABLE
- THREE HINGED ARCH
- TORSION of RODS and TUBES
- TWO HINGED PARABOLIC ARCH
- UNIVERSAL FRAME and STAND
- UNSYMMETRICAL BENDING & SHEAR CENTER
- Theory of Machines (HTM)
- BELT, BRAKE AND CRANK MODULE
- CAM and FOLLOWER APPARATUS
- CASTOR, CAMBER and KING PIN INCLINATION
- COUPLING MODULE
- CRANK and CONNECTING ROD APPARATUS
- DISC BRAKE APPARATUS
- EFFICIENCY OF SCREW THREADS
- ELASTIC SHAFT MODULE
- ENHANCED INSTRUMENTATION MODULE
- EPICYCLIC GEAR TRAIN
- FAN VIBRATION MODULE
- FOUR BAR CHAIN
- GEAR ASSEMBLY UNIT COMBINED DRIVES
- GEAR DAMAGE MODULE
- GEAR TOOTH FORM APPARATUS
- GEAR TRAIN APPARATUS
- GOVERNOR APPARATUS
- HOOKE'S COUPLING
- LOAD AND BRAKE MODULE
- MACHINERY DIAGNOSTICS BASE UNIT & INSTRUMENTATION
- RELATION BETWEEN ANGULAR and LINEAR SPEEDS
- ROLLER BEARING MODULE
- SIMPLE FLYWHEEL
- SINGLE EPICYCLIC GEAR TRAIN
- STATIC and DYNAMIC BALANCING APPARATUS
- THE WHIRLING OF SHAFTS
- WHEEL and AXLE
- WHEEL and DIFFERENTIAL AXLE
- UTM Magnus (HPM)
- Vibration (HVT)
- ADDITIONAL SPRING KIT
- BEAM BENDING (TRANSVERSE) VIBRATIONS MODULE
- BIFILAR / TRIFILAR SUSPENSION
- COMPOUND PENDULUM
- DIGITAL SPRING MASS VIBRATION APPARATUS
- FORCED DISPLACEMENT OF SPRING SUPPORT MODULE
- FORCED VIBRATION MODULE
- FREE & FORCED VIBRATIONS
- MOTOR CONTROLLER
- PENDULUM MODULE
- SEISMIC TABLE
- TORSIONAL OSCILLATION MODULE (FREE & FORCED)
- TORSIONAL VIBRATION APPARATUS
- UNIVERSAL VIBRATION APPARATUS
- VIBRATION ASBORBER
- VIBRATION FRAME
- Vocational Training
- ABSORPTION REFRIGERATION DEMONSTRATOR
- ADVANCED TRAINING UNIT - 10 SYSTEM FAULTS
- ADVANCED TRAINING UNIT FOR FAULT LOCATION - 25 FAULTS
- AUTOMOTIVE AIR CONDITIONING TRAINER - 4 FAULTS
- BASIC INSTALLATION TRAINING PACKAGE
- COMMERCIAL REFRIGERATION TRAINING UNIT
- HEATING, VENTILATION, AIR CONDITIONING CONTROL AND FAULT SIMULATOR
- HERMETIC REFRIGERATION SYSTEM TRAINING PROGRAM - 5 FAULTS
- REFRIGERATION AND AIR CONDITIONING CONTROL AND FAULT SIMULATOR
- REFRIGERATION SYSTEM - DOMESTIC
- REFRIGERATION TEST AND SERVICE KIT
- REVERSE CYCLE REFRIGERATION and AIR CONDITIONING UNIT
- SPLIT AIR CONDITIONING TRAINER
- STUDENT TOOL KIT
- VISUAL REFRIGERATION TRAINING UNIT
- WATER CHILLER TRAINER
- Resources
- News
- Contact