Product number: F300G

A series of four straight tubes of different diameters with end pressure tapings allow pressure losses in a straight pipe to be investigated at a range of Reynolds numbers. Bends, sudden enlargements and contractions are included to allow investigation of pressure loss and recovery.

The unit is driven by an ejector (jet pump) allowing investigation of entrainment ratio and ejector performance.

The pressures, temperatures and air flow rate are recorded by a combination of instrumentation on the Compressible Flow Range F300 base unit and the optional module. A digital hand held manometer is supplied.

Specifications and resources

13 x pressure tapping's
Small Tube Bore Diameter: Ø6.8mm
Large Tube Bore Diameter: Ø11mm
Base Board: 1200mm long x 380mm wide
4 x straight tubes
6 x bends
2 x reducers