803 Basic Installation Training Package

803 Basic Installation Training Package

The unit consists of an air cooled condensing unit with high back pressure, high starting torque hermetic compressor, Complete with: Suction and Discharge Service Valves; Gauge Manifold Connections and Built in Motor Protector

The powder coated evaporator is a forced air, blow through type with removable front panel and galvanised sheet steel casing. The evaporator is a finned coil type with fins a 5 fins per inch.

The unit may be thermally loaded for performance investigation and has a dial thermometer,

Internally equalised Thermostatic Expansion Valve; Liquid Line Filter Drier; Liquid-vapour Heat Exchanger; High Pressure Switch; Low Pressure Switch; High Pressure gauge; Low pressure Compound gauge.

An electrical control box is mounted on the back panel and includes indicators/warning lamps on/off and heat load contactors and overloads as well as residual current device for protection against earth leakage.

803 Basic Installation Training Package

Supplied in kit form clearly labelled and identified for mounting on a supplied steel frame with stainless steel base and back panel.

The components comprise:

Air cooled condensing unit with high back

pressure, high starting torque hermetic compressor.

Complete with:

Suction and Discharge Service Valves

Gauge Manifold Connections

Built in Motor Protector

Forced air, blow through type evaporator, with

15-watt fan motor. Powder coated galvanised

sheet steel casing with removable front panel.

Evaporator coil constructed from internally

grooved copper tube, and fitted with aluminium

fins at 5 FPI.

Detachable Insulated hood with variable heat

load: 60, 100, 120, 160 or 200 watts.

Dial Thermometer.

Internally equalised Thermostatic Expansion Valve.

Liquid Line Filter Drier.

Heat Exchanger.

High Pressure Switch,

Low Pressure Switch.

High Pressure gauge.

Compound gauge.

An electrical control box is mounted on the back panel and includes indicators/warning lamps on/off and heat load contactors and overloads as well as residual current device for protection against earth leakage.

Electrical:

A: 13 Amp 220-240 Volts, Single Phase, 50Hz (With earth/ground).

  OR

B: 26 Amp 110-120 Volts, Single Phase, 60Hz (With earth/ground).