Data Logging and Testing (2)


	HTS700B Test Room This is a thermally insulated walk in test room that is designed for use with the optional Temperature and Humidity Control and the Data Logger System. The Test Room is suitable for thermal load testing of domestic and small commercial refrigerators as well as other domestic appliances to recognised international standards when used in conjunction with the Temperature and Humidity Control. An extension package is also available as an optional extra.

HTS700C Voltage Control and Transducer Panel
This wall mounted unit houses a 10A variable voltage transformer, analogue voltmeter and digital wattmeter.The digital wattmeter has DC voltage outputs that may be used to transmit signals representing mains Voltage, Load Current and Load Power to the Data Logger System.The unit is designed to allow testing of domestic appliances at elevated temperature conditions within the Test Room and at voltages between 0 and 105% of the local supply. Other variants offer three phase voltage control and frequency conversion and monitoring.

D102B Remote Connection Panel
This panel replicates the Data Logger System screw terminals and is designed to allow transducers to be easily connected and disconnected within the Test Room while the Data Logger System remains at external ambient conditions.

D102C Power Consumption Meter
This meter is specifically designed to allow measurement of domestic appliance power consumption using the Data Logger System while under elevated ambient conditions in the Test Room.The meter has a digital display, selectable 0-20 or 0-40kWh range and will accept loads up to 10Amps and 50/60Hz.

D102D Logic Relay Transducer
This device enables the Data Logger System to record the cycle time of domestic appliances that use on/off thermostats or controls.

TYL 100 Series Test Packages
These test packages conform to an international standard and are used for load testing of domestic and commercial refrigerators and freezers.